Emerson Radio NR52 - Manual (Page 9)

8
OPERATING INSTRUCTIONS
LISTENING TO THE RADIO
1.) To turn the system ‘on’, rotate the ON/OFF-VOLUME control clockwise until a
‘click’ is heard, and set the Volume to a low level. The Tuning Dial light comes
‘on’.
2.) Set the Function selector (AM/FM/CD) to the desired band.
3.) Rotate the TUNING control to tune to the desired radio station.
4.) Adjust the ON/OFF-VOLUME and TONE control to the desired level.
5.) When you are finished listening turn the ON/OFF-VOLUME control counter
clockwise until a ‘click’ is heard.
Antenna Information
The AM antenna is inside the cabinet. If AM reception is unsatisfactory try
repositioning the cabinet slightly until the internal antenna is picking up the strongest
signal.
The FM wire antenna is located on the back cabinet. If necessary adjust the position
and direction of this antenna until you find the position that provides the best
reception.
NR52_010704.p65 7/1/2004, 11:53 8