Emerson Radio NR52 - Manual (Page 12)

1 1
PROGRAMMED PLAYBACK
This feature allows you to program up to 20 tracks on a disc for playback in any
desired order.
Note: You cannot program tracks while a disc is playing. If the disc is playing
press the STOP button first before beginning the programming steps below:
1.) Press the PRG. button to enter the Program Mode. The
Program indicator and Program number ‘01’ flash.
2.) Press the F. SKIP or B. SKIP buttons to select
the first track number you wish to enter in the program
memory. Example: Track Number 8.
3.) When the desired track number appears on the display,
press the PRG. button again to enter that track in
memory. The program number display advances to “02”.
4.) Repeat Steps 2-3, selecting a different track number each time until you have
entered up to 20 tracks in the program memory.
Note: You may program the same track number to play multiple times in
the program sequence if desired.
5.) P r e s s t h e P L AY / PAU S E b u t t o n t o b e g i n
Programmed Playback. The Program indicator stops
flashing and remains ‘on’. Playback will begin with the
first track you programmed and will continue until the
last programmed track has played.
PRG.
PRG.
PRG.
PRG.
NR52_010704.p65 7/1/2004, 11:53 11