beautypg.com

Using stereo headphones (not included), Line out jacks – Emerson Radio NR52 User Manual

Page 14

background image

1 3

USING STEREO HEADPHONES (NOT INCLUDED)

Connect a set of stereo headphones with a 3.5mm mini-plug to the PHONE jack

on the front panel. Before putting on the headphones always set the ON/OFF-

VOLUME control to a low level. Then put the headphones on and gradually increase

the Volume to a comfortable listening level. The built-in speaker automatically

shuts off when headphones are connected to the PHONE jack.

Note: Sound from PHONE output jack is mono.

LINE OUT Jacks

This system includes a set of LINE OUT jacks which allow you to record from the

radio or CD player of this system to an external recording device such as a cassette

recorder, Mini-Disc, etc.

Connect the Line LINE OUT jacks of this system to the Record Input jacks of your

external recording device. Connection cables are not included. Refer to the

instructions supplied with your external recording device for proper connection

and operation. Operate the CD player or radio of this system as described in the

instructions above. The CD or radio programming of this system will be recorded

directly onto your external recording device.

Note: Line Out from CD will be Stereo, while Radio is Mono.

NR52_010704.p65

7/1/2004, 11:53

13