Irc-6 (infrared remote control) operation – CHAUVET DJ Swarm 4 FX 3-In-1 LED User Manual
Page 25
Swarm 4 FX User Manual Rev. 2
Page 25 of 80
IRC-6 (Infrared Remote Control) Operation
Note
: Make sure to point the IRC-6 directly at the receiver on the product.
Automatic Mode
Automatic mode will enable you to run the automatic programs on the product.
To turn on Automatic mode:
•
Press and hold
on the IRC-6.
•
Press any number between
<0>
and
<9>
to choose your auto program.
o
<0> Aut0
o
<5> Aut5
o
<1> Aut1
o
<6> Aut6
o
<2> Aut2
o
<7> Aut7
o
<3> Aut3
o
<8> Aut8
o
<4> Aut4
o
<9> Aut9
•
Press
<+>
or
<–>
to either increase or decrease the speed of the program.
Sound-Active Mode
Sound-Active mode will enable the product to respond to the music.
To turn on Sound-Active mode:
•
Press and hold
on the IRC-6.
•
Press any number between
<0>
and
<9>
to choose your auto program.
o
<0> Sou0
o
<5> Sou5
o
<1> Sou1
o
<6> Sou6
o
<2> Sou2
o
<7> Sou7
o
<3> Sou3
o
<8> Sou8
o
<4> Sou4
o
<9> Sou9
Strobe Modes
To adjust the strobe program and rate:
•
Press
on the IRC-6.
•
Press
<0>
to strobe all, or any number between
<1>
and
<9>
to choose your auto program.
•
Press
<+>
or
<–>
to increase or decrease, respectively, the strobe rate.
•
Press
again to turn off the strobe.
Moonflower Color Modes
To set a specific color output for the moonflower effects:
•
Press
for red.
•
Press
for green.
•
Press
for blue.
•
Press
for amber.
•
Press
for purple.
•
Press
for white.
Miscellaneous Operation
To black out the lights:
•
Press
on the IRC-6. This will turn off all the lights until the button is pressed
again.
Note
: The IRC-6 will not respond to any inputs when Black Out is activated. If the remote does not respond when a button is
pressed, try pressing
. You may have inadvertently activated Black Out.