Emerson Radio SB251 - Manual (Page 18)

1 7
5.) When you have completed programming the
desired tracks press the PLAY/PAUSE button
to begin programmed playback. The “ ” and
“PROG” indicators appear in the display. Playback
will begin on the first track you programmed and
will continue until the last programmed track has played.
6.) When the program is completed the player stops and the display again shows
the total tracks on the disc. The PROG indicator disappears but the program
sequence remains in the memory. To repeat the program press the PROGRAM
button and then press the PLAY/PAUSE button. To cancel the program
from the memory, press the STOP button twice.
Programmed Repeat Playback
You may use the Programmed Playback and Repeat features together to
continuously repeat a programmed sequence. First program the desired sequence
according to steps 1 through 5 above. When
Programmed Playback begins press the REPEAT
button twice to select the Repeat All Tracks mode. The
REPEAT ALL indicator appears in the display together
with the PROG and indicators. The programmed
sequence will be repeated continuously.
Headphone Jack
The Stereo Headphone Jack is located on the back cabinet. Connect a set of
stereo headphones (not included) to this jack for private listening without disturbing
others. The internal speakers are automatically disconnected when headphones
are connected to the headphone jack.
IMPORTANT: When using headphones always set the volume control to a
low level before you put the headphones on. Then put the headphones on and
gradually increase the volume to a comfortable listening level.
SB250_251_ib071703.p65 17/7/2003, 14:27 17