Emerson Radio SB251 - Manual (Page 13)

1 2
6.) Press the PLAY/PAUSE button. Playback
begins on track 1 and the Play indicator appears
in the display.
Adjust the VOLUME and BASS BOOST controls
as desired.
7.) Playback will continue until the last track has played then the disc stops, the
Play indicator disappears, and the display again shows the total number of
tracks on the disc. To stop playback before the disc ends press the STOP
button at any time. The disc stops and the display again shows the total tracks
on the disc.
8.) If you are finished listening remove your disc from the player and close the CD
door.
9.) Slide the POWER OFF/CD/RADIO selector switch back to the POWER OFF
position. The Power indicator goes off.
Pause Control
To pause momentarily during CD playback press the PLAY/PAUSE button
again. The sound stops and the track number display
flashes but the disc continues to spin. Press the PLAY/
PAUSE button again to cancel the Pause mode
and resume normal playback. The sound resumes at
the same point on the disc and the track number display
stops flashing.
SB250_251_ib071703.p65 17/7/2003, 14:27 12