Emerson Radio SB251 - Manual (Page 17)

1 6
Programmed Playback
Use the Programmed Playback feature to play up to 32 tracks on a disc in any
desired order. You may also program a particular track to play several times within
a programmed sequence if desired.
Notes: You cannot program a disc while it is playing. Press the STOP button
to stop playback and then follow the programming steps below.
1.) Load your disc as usual and wait until the display
shows the total number of tracks on the disc.
2.) Press the PROGRAM button on the front panel.
The PROG indicator begins flashing and Program
Memory number “01” appears in the display.
3.) Press the SKIP Forward or SKIP Reverse
buttons to select the first track number to be
programmed. Example: Track number 07.
When the desired track number is flashing in the
display press the PROGRAM button again.
Track 07 is now entered in Program Memory
number “01”. The program memory number now
advances to number “02”.
4.) Repeat step 3, selecting a different track number each time until you have
entered up to 32 tracks in the program memory. To confirm the program after
you have entered the last track press the PROGRAM button repeatedly. The
display will scroll through all the tracks you programmed in sequence.
SB250_251_ib071703.p65 17/7/2003, 14:27 16