Emerson Radio SB251 - Manual (Page 12)

1 1
PLAYING COMPACT DISCS
NOTE: Although this portable CD player can read CD-R and CD-RW discs, in
addition to normal CDs, the playability of CD-R and CD-RW discs may be
effected by the type of software that was used to create the discs, as well as
the quality and condition of the blank media you are using. 100% playability
cannot be guaranteed. This is not an indication of a problem with the player.
1.) Slide the POWER OFF/CD/RADIO selector switch on the top cabinet to the
CD position. The Power indicator will light.
2.) The display will show two flashing dashes “– –” in
the track number display.
After a few seconds the track number display will
show “no”, indicating that there is no disc in the
player.
3.) Press on the indented area of the CD door to open it. The “OP” indicator
appears in the display. If you have not already done so, before loading your
own disc, be sure to remove the dummy CD transit card from the player and
discard it.
4.) Place your disc on the center spindle with the printed label side facing up.
Make sure that the disc is properly centered on the spindle.
5.) Close the CD door. The disc will spin for a few
seconds while the player reads the TOC (Table of
Contents) on the disc. Then the disc will stop
spinning and the display will show the total number
of tracks on the disc.
SB250_251_ib071703.p65 17/7/2003, 14:27 11