RME Fireface UCX II 40-Channel USB-B Audio/MIDI Interface - Manual (Page 76)

76 User's Guide Fireface UCX II © RME
25.8.3 OSC Page
The OSC page has four independent settings for up to four MIDI remote controls via Open
Sound Control (OSC). This is a network based remote protocol that can be used for example by
Ap
ple’s iPad with the app TouchOSC or Lemur to wirelessly remote control TotalMix FX running
on a Mac or Windows computer.
Index
Select one of four settings pages and thus remote controls. Settings are remembered automati-
cally. To activate or de
activate any of the four remote controls check or uncheck ‘In Use’.
TotalMix FX OSC Service
 IP. Shows the network address of the
computer running TotalMix FX (local
host). This address must be entered on
the remote side.
 Host Name. Local computer name.
 Port incoming. Must match the remote
entry ‘Port outgoing’. Typical values are
7001 or 8000.
 Port outgoing. Must match the remote
entry ‘Port incoming’. Typical values are
9001 or 9000.
Remote Control
 IP or Host name. Enter the IP or host
name of the remote control. Please note
that the IP number usually works better
than the host name.
Options
 Send Peak Level Data. Activates the
transmission of the peak level meter da-
ta.
Peak Hold activates the peak hold
function as set up for the TotalMix level
meters in the preferences.
 Lock Remote to submix. When acti-
vated the current remote control can on-
ly modify the submix selected from the
drop-down list. This prevents havoc in
multi-remote monitoring environments.
 Number of faders per bank. Available choices are 8 (default), 12, 16, 24, 32 and 48. Note
that when working in underperforming networks, especially wireless, a higher number of
faders might not work as smooth as expected.