RME Fireface UCX II 40-Channel USB-B Audio/MIDI Interface - Manual (Page 110)

110 User's Guide Fireface UCX II © RME
Word Clock

BNC

Internal termination 75 Ohm switchable

Automatic Double/Quad Speed detection and internal conversion to Single Speed

SteadyClock guarantees super low jitter synchronization even in varispeed operation

Not affected by DC-offsets within the network

Signal Adaptation Circuit: signal refresh through auto-center and hysteresis

Overvoltage protection

Level range: 1.0 Vpp – 5.6 Vpp

Lock Range: 27 kHz – 200 kHz

Jitter suppression: > 50 dB (2.4 kHz)
39.5 Digital Outputs
AES/EBU

XLR, transformer-balanced, galvanically isolated, according to AES3-1992

Output level Professional 4.5 Vpp, Consumer 2.6 Vpp

Format Professional according to AES3-1992 Amendment 4

Format Consumer (SPDIF) according to IEC 60958

Single Wire mode, sample rate 28 kHz up to 200 kHz
SPDIF coaxial

1 x RCA, according to IEC 60958

Output level Professional 1.2 Vpp, Consumer 0.6 Vpp

Format Professional according to AES3-1992 Amendment 4

Format Consumer (SPDIF) according to IEC 60958

Single Wire mode, sample rate 28 kHz up to 200 kHz
ADAT

1 x TOSLINK

Standard: 8 channels 24 bit, up to 48 kHz

Double Speed (S/MUX): 4 channels 24 bit 96 kHz

Quad Speed (S/MUX4): 2 channels 24 bit 192 kHz
Word Clock

BNC

Max. output voltage: 5 Vpp

Output voltage @ 75 Ohm termination: 4.0 Vpp

Output impedance: 10 Ohm

Frequency range: 27 kHz – 200 kHz
39.6 General

Power supply: external power supply

Typical power consumption: 13 Watts

Current at 12 Volt operating voltage: 910 mA (11 Watts)

Dimensions incl. rack ears, full depth (WxHxD): 258 x 44 x 155 mm (10.16" x 1.73" x 6.1")

Dimensions without rack ears, body depth (WxHxD): 215 x 44 x 130 mm (8.5" x 1.73" x 5.1")

Weight: 910 g ( 2.0 lbs)

Temperature range: +5° up to +50° Celsius (41° F up to 122°F)

Relative humidity: < 75%, non condensing