Tascam ML-32D Dante / Analog Converter - Manual (Page 6)

6
TASCAM ML-32D / ML-16D
Beware of condensation
Condensation could occur if the unit is moved from a cold place
to a warm place, it is used immediately after a cold room has
been heated or it is otherwise exposed to a sudden temperature
change.
To prevent this, or if this occurs, let the unit sit for one or two
hours at the new room temperature before using it.
Cleaning the unit
Use a dry soft cloth to wipe the unit clean. Do not wipe with chem-
ical cleaning cloths, thinner, alcohol or other chemical agents. Do-
ing so could damage the surface or cause discoloration.
Using the TEAC Global Site
You can download this Owner’s Manual and the Reference Man-
ual necessary for this unit from the TEAC Global Site (http://
teac-global.com/).
In the TASCAM Downloads section, select the desired language
to open the Downloads website page for that language.
Product registration
Customers in the USA, please visit the following TASCAM web-
site to register your TASCAM product online.
http://tascam.com/
Included items
This product includes the following items.
Take care when opening the package to avoid damaging the
items. Keep the packing materials for transportation in the future.
Please contact the store where you purchased this unit if any of these
items are missing or have been damaged during transportation.
0
Main unit ...............................................................................................× 1
0
Power cord .............................................................................................x 1
0
Rackmount screw kit .........................................................................× 1
0
Owner’s Manual (this document) including warranty ..........× 1
Conventions used in this manual
In this manual, we use the following conventions:
0
When we refer to buttons, connectors and other parts of this
unit, we use a bold font like this: POWER button.
0
When we show characters that appear on the display, the
typeface looks like this:
ON . The same format is used for char-
acters that appear on the display of units that can be con-
nected.
0
As necessary, additional information is provided under TIP,
NOTE and CAUTION headings.
TIP
These are tips about how to use the unit.
NOTE
These provide additional explanations and describe special
cases.
CAUTION
Failure to follow these instructions could result in injury, dam-
age to equipment or lost recording data, for example.
Precautions for placement and use
0
The operating temperature range of this unit is 0–40 °C.
0
Do not install this unit in the following types of locations. Do-
ing so could cause malfunction.
Locations with frequent vibrations
Near windows or other places exposed to direct sunlight
Near heaters or other extremely hot places
Extremely cold places
Very humid or poorly ventilated places
Very dusty places
0
Make sure that the unit is mounted in a level position for cor-
rect operation.
0
To enable good heat dissipation, do not place anything on
top of the unit.
0
Do not place the unit on top of a power amplifier or other de-
vice that generates heat.
Notes about power supplies
0
Insert the included power cord all the way into the AC IN con-
nector.
0
Do not connect a power supply other than one that is
AC100V-240V (50-60Hz).
0
Hold the power cord by its plug when connecting or discon-
necting it.