Envision Peripherals EN7220 - Manual (Page 16)

EN7220
15
How To Adjust A Setting
1. Press the MENU-button to activate the OSD window (Figure 4).
2. Press
<
or
>
to navigate through the functions. Once the desired
function is highlighted, press the MENU-button to activate it. If the
function selected has a sub-menu, press
<
or
>
again to navigate
through the sub-menu functions. Once the desired function is highlighted,
press MENU-button to activate it.
3. Press
<
or
>
to change the settings of the selected function.
4. To exit and save, select the exit function. If you want to adjust any other
function, repeat steps 2-3.
Figure 4 The OSD Message
OPERATING INSTRUCTIONS (cont)