Epson C82605 - Manual (Page 17)

Selecting PostScript
For users
1.
2.
Hold down the SelecType button for several seconds until you
enter SelecType Level 2. A SelecType Level 1 option is displayed
briefly before the printer enters the Level 2 main menu.
Press the until the “CH CONFIG P,S” menu
appears.
3.
4.
5.
Press the to enter the option; one of the submenus
(MODE, I/F, or RX-/BUFFER) appears.
Press or until the MODE submenu appears. If
this menu is displayed in step 3, ignore this step.
Press the
to enter the option; one of the options and
the icon appear.
6. Press the until the PS” option appears.
7. Press the to set the PS option.
8. Press the SelecType button once to exit SelecType.
The PS mode remains in effect until you change the setting or turn
off the printer. If you want to make this setting permanent, use the
“P-CONFIG. SAVE” menu in SelecType Level 2. See your printer
manual.
Handing the PostScript CARD 1-5