Emerson Radio CKD9907 User Manual

Page 9

CD OPERATION

NORMAL PLAYBACK

1. Slide the FUNCTION selector to the CD position.

2. Press the POWER button to turn the unit On.

3. Press the CD door OPEN button. Place

your disc on the center spindle with the
printed label side facing up and gently press

down on the disc near the center hole to make

sure that it is firmly locked in place on the
spindle.

4. Close the CD door, pressing down on the right

side marked CLOSE to make sure that the

door locks properly. The disc will spin as the

player reads the Table of Contents on the
disc. The disc stops and the display shows

the total number of tracks for about 5 seconds

and then returns to the correct time display.

5. Press the PLAY/PAUSE

button to begin playback. The display shows 01

and playback begins on track 1. After 5 seconds the display returns to the
correct time. Playback continues until all tracks have been played. To see the

track number during playback presses the DISPLAY button. The track number

appears for 5 seconds and then the correct time reappears.

6. When all tracks have been played the player stops. To stop playback before

the disc ends press the STOP button at any time.

7. Press the CD door OPEN button to open the door. Remove your disc and

close the door. Return your disc to its protective storage case.

8. Press the POWER button to turn the power Off.

PAUSE OPERATION
To pause momentarily press the PLAY/PAUSE

button during playback. The

sound stops but the disc continues to spin. The track number flashes for 5 seconds

and then the correct time reappears. Press PLAY/PAUSE

button again to

cancel pause and resume normal playback.

CKD9907_ib.p65

2001/4/17, PM 12:19