Emerson Radio CKD9907 User Manual

Page 12

5. Press PLAY/PAUSE

button to begin programmed playback. The tracks you

selected will play in the programmed order. When all tracks have been played
the player stops.

NOTES:
A. You must select a track and enter it in the memory while the PROG indicator is

flashing (approximately 10 seconds). If the PROG indicator stops flashing the

track will not be entered in the memory.

B. If you press the SKIP + or SKIP buttons during programmed playback the

player will skip forward or back to the next track in your program, not the next

track on the disc.

ALARM OPERATION

You can chose to wake up to the electronic BUZZER, to AM/FM radio, or to the CD

player.

First check the wake up time setting by sliding the ALARM switch to the SET position.

Adjust the wake up time setting if necessary. See Setting The Wake Up Time

on page 6. Then set the ALARM switch to the ON position. The ALARM On
indicator appears in the display.

To wake to buzzer

Set the FUNCTION selector to the BUZZER position.

To wake to radio

Set the FUNCTION selector to the AM or FM position. Make sure that the radio

station is correctly tuned and the volume is set to the desired level.

To wake to CD

Set the FUNCTION selector to the CD position. Confirm that a disc is in the

player and the volume is set to the desired level.

At the selected wake up time the power will turn On and operate the buzzer,

radio or CD according to your selection. The alarm will continue for 60 minutes
and then shut itself off automatically and reset itself for the following day.

To stop the alarm immediately

Press the POWER button to turn the power Off. The alarm stops and resets

itself to repeat again the following day at the same time. To cancel the alarm

completely slide the ALARM switch to the OFF position. The alarm will not come
on again.

CKD9907_ib.p65

2001/4/17, PM 12:19