Input settings – VIEWSONIC ViewBoard IFP8662 86" 4K Interactive Display User Manual
Page 39
39
Input Settings
To select an Input Source:
1.
Press
INPUT
on the remote control, press the setting button
on the front
panel, or press the
setting icon from the toolbar to display the
Input Settings
menu.
2.
Press
q
/
p
/
t
/
u
to select the input source you want.
NOTE:
PC source will only display when the slot-in computer is connected.
3.
Press
ENTER
on the remote control, or touch the input source.
4.
Press
EPG/BACK
on the remote control, or touch a blank area outside of the
menu to exit.
NOTE:
To adjust the settings of an input source,
touch the setting icon next to
the highlighted input source.
This manual is related to the following products: