Epson 9-Pin Dot Matrix Printer FX-980 - Manual (Page 2)

2
Loading Continuous Paper Onto the Rear Push Tractor
Open the paper guide cover and remove the
paper guide base. Open both sprocket covers, and fit the first
three holes of the paper, printable side
down, over the tractor pins. Then close the
sprocket covers.
Note:
Load continuous paper that has a clean, straight
edge to avoid paper jams.
1
paper guide base
paper guide cover
2
Q
To feed continuous paper to the standby
position where you can remove it easily,
press the Load/Eject button.
Q
When you load continuous paper of a
different size or thickness, adjust the position
of the sprockets or change the paper
thickness lever setting. See Chapter 2 of the
User’s Guide for instructions.
To load continuous paper onto the rear push tractor, follow these steps: