Epson 9-Pin Dot Matrix Printer FX-980 - Manual (Page 4)

4
Loading Continuous Paper Onto the Front Push Tractor
Open the front paper guide by pulling the
tab in the center. Remove the guide by
grasping both sides and pulling it straight
out of the printer. Open both sprocket covers and fit the first
three holes of the paper, printable side up,
over the tractor pins. Then close the
sprocket covers.
Note:
Load continuous paper that has a clean, straight
edge to avoid paper jams.
1 2
Q
To feed continuous paper to the standby
position where you can remove it easily,
press the Load/Eject button.
Q
When you load continuous paper of a
different size or thickness, adjust the position
of the sprockets or change the paper
thickness lever setting. See Chapter 2 of the
User’s Guide for instructions.
To load continuous paper onto the front push tractor, follow these steps:
Note:
To use the front push tractor, install the tractor unit in the front position and load continuous paper in
the front slot.