Epson 9-Pin Dot Matrix Printer FX-980 - Manual (Page 6)

6
Removing the Printed Document From the Push Tractor
Make sure the Tear Off/Bin lights are
flashing. (You may need to press the Tear
Off/Bin button.) This indicates that your
paper is at the current tear-off position.
Open the paper path guide cover, and tear
off the printed document using the printer’s
tear-off edge.
1
2
from the front push tractor
from the rear push tractor
Q
When you resume printing, the printer
automatically feeds the paper backward to
the top-of-form position, and begins printing.
Q
To feed continuous paper backward from the
tear-off position into the standby position,
press the Load/Eject button.
To remove the printed document from the front and rear push tractor, follow the steps below. To remove
continuous paper from the optional pull tractor, see Chapter 2 of the User’s Guide.