DJI Action 2 Front Touchscreen Module - Manual (Page 13)

DJI Action 2 User Manual
Not final
10 © 2021 DJI OSMO All Rights Reserved.
Auto Power Off: tap to set the time that the camera will automatically power off.
LED: tap to enable or disable the LED of the camera unit and the front touchscreen module or the
power module when connected.
Continue Last Livestream: tap to enable so the camera unit can continue from last livestream after
livestream has stopped.
Language: tap to set the language to English, Simplified Chinese, Traditional Chinese, Japanese,
Korean, Thai, German, Spanish, French, Italian, Russian, Brazilian Portuguese, Turkish, Indonesian,
or Polish.
Factory Reset: tap to reset default settings.
Device Info: tap to view name, serial number, firmware version, and quick start guide.
Compliance Info: tap to view compliance information.
4. Screen Lock
Tap to lock screen. Swipe up on the touchscreen to unlock the screen.
5. Pro Switch
Tap to switch to Pro mode and be able to adjust Format, Exposure, and WB settings.
6. Orientation Lock
Tap to switch between automatic orientation and locked orientation.
7. Brightness
Tap and slide to adjust the brightness.
8. Voice Control Switch
Tap to enable voice control so the user can control the camera with set voice commands.
Swipe Up
Swipe up and then swipe left or right to set parameters such as aspect ratio, countdown timer, and
resolution.
1. In Photo mode:
Set the aspect ratio and countdown timer.
2. In Video mode:
Set the resolution and frame rate. Tap the upper left corner to set the duration of the loop recording.*
Tap on the upper right corner to turn off electronic image stabilization, enable RockSteady, or enable
HorizonSteady. Electronic image stabilization is unavailable when using certain resolutions and frame
rates.
3. In QuickClip mode:
Set the resolution and frame rate. Tap the upper left corner to set the duration of the QuickClip. Tap
on the upper right corner to turn off electronic image stabilization, enable RockSteady, or enable
HorizonSteady. Electronic image stabilization is unavailable when using certain resolutions and frame
rates.
4. In Slow Motion mode:
Set the resolution and speed ratio.
5. In Timelapse mode:
Select Hyperlapse or Timelapse mode. The speed ratio can be set in Hyperlapse mode. The scene,
interval time, and shooting time can be set in Timelapse mode. Tap the upper right corner to set the
resolution of Timelapse mode.
* Coming soon.