TOA Electronics U-13R - Unbalanced Line Input Module with High/Low Cut Filters and Mute-Receive for 900 Series (Dual RCA) - Manual (Page 18)

U-03
U-11
U-11 Series Unbalanced Line Input with Mute-Receive
U-03 Series Unbalanced Line Input with High/Low Cut Filters
• For Unbalanced, Line Level Sources such as AM/FM
tuners, cassette decks, CD players, computer sound cards,
jukeboxes, mixers and satellite receivers.
• Use For Adjacent Sources (less than 15 feet from the
host unit).
• Responds To Mute Bus Activation , via Mute SEND
module or switch-closure.
• Responds To Both Mute Bus # 1 And Mute Bus # 2 By
Default
(cut jumper(s) to disconnect individual mute bus).
• Connectors: RCA jack (U-11R), removable terminal block
(U-11S).
Faceplate Controls Gain
PCB Controls Mute bus selection
Input Impedance 220 kohms, unbalanced
Sensitivity -18 ~ +12 dBu
Gain -30 ~ 0 dB
Noise (S/N) 90 dB
CONNECTOR DIAGRAMS
BLOCK DIAGRAM
SPECIFICATIONS
LINE INPUT MODULES: UNBALANCED PAGE 19
CONNECTOR DIAGRAMS
BLOCK DIAGRAM
SPECIFICATIONS
U-03R
U-03R U-03S
U-03S
U-11R
U-11R
U-11S (old style) U-11S (new style)
U-11S (old style)
• For Unbalanced, Line Level Sources such as AM/FM
tuners, cassette decks, CD players, computer sound cards,
jukeboxes, mixers and satellite receivers.
• Use For Adjacent Sources (less than 15 feet from the
host unit).
• High and Low Cut Filters for tone control, 4.2 kHz and
330 Hz, 6 dB/octave.
• Connectors: dual RCA jack w/ passive summing (U-03R),
removable terminal block (U-03S).
Faceplate Controls Gain, high & low cut filters
Input Impedance 220 kohms, unbalanced
Sensitivity -17 ~ +13 dBu
Gain -30 ~ -1 dB
Noise (S/N) 85 dB
U-11S (new style)