FlashForge Adventurer 4 3D Printer (FFF) User Manual
Page 24
Q12
. How to solve edge warping and weak adhesion?
Heating up the platform can increase adhesion between platform and
model.
Adding raft to model when slicing in FlashPrint.
Apply solid glue to platform before printing.
Use extruder calibration in expert mode or leveling calibration to reduce
the distance between the nozzle and the platform.
Make sure the platform is flat. Complete 9-point leveling suggested.
Apply extruder calibration to reduce the gap.
Method1：
Method2：
Method3：
Method4：
Method5：
Method6：
Q6. Can we use other brand filament which is not produced by Flashforge?
Q7
. Is Adventurer 4 Series compatible with all kinds of AC power input?
Adventurer 4 Series is equipped with a built-in 24V/13.3A power supplier, suitable
for 100V-240V input voltage.
Q8. Is Adventurer 4 Series capable of turning itself off automatically after printing
job is finished?
No .
Q9
. What kinds of file formats does Adventurer 4 Series support?
Q10. Does Adventurer 4 Series support other cloud platforms besides FlashCloud?
Yes, Adventurer 4 Series interface is open up to all other cloud platforms.
Input: 3MF/STL/OBJ/FPP/BMP/PNG/JPG/JPEG Files.
Output: GX/G files.
Q11
. Is the ABS printing safe?
ABS filament will give off certain poisonous gas when heated up, please put the printer in
well-ventilated condition when printing ABS. We suggest using non-toxic PLA filament when
printer is near children.
Adventurer 4 Series supports ABS, PLA, PC, PETG, PLA-CF, PETG-CF, etc., which have
different ingredients. Adventurer 4 Series tests out default settings like temperature
and filament output to ensure the best printing quality. Other brands of filaments can
be used with the parameters adjusted. Because the required temperature between
different materials is slightly different, it is recommended to clean the previous
filaments before using new filaments, otherwise it is easy to cause extruder blockage.
23