FlashForge Adventurer 4 3D Printer (FFF) User Manual
Page 19
Import stl or obj file into the slicer; after slicing, the printer will heat up and start
printing automatically.
Method 2: USB Device
Files can be read in USB disk. Insert USB disk and select the files to print.
3.Model File Transfer
Method 1: Wi-Fi Connection
Tap [Settings]-[Network]-[WIFI], operate according to the instruction. Open
FlashPrint, click [Print], then click [Machine Type], select [FlashForge Adventurer 4 /
4 Lite]. You can try to enter the IP address or scan it automatically. The IP address
can be viewed in [settings] - [about].
When the user wants to use
the browser to view images,
the printer and PC must be
in an intranet (that is, the
printer and PC connect to
the same router).
IP Address
IP Port：
192
.
.
.
:
168
2
122
8899
Auto-scan
Connection
Connect
Note
18