Creality CR-10 SmPro FDM 3D Printer - Manual (Page 18)

11. Preheating Method 预热方法
Method 1 方法1
>>
Notes:The interface of the manual of instruction is only for reference, and the actual
interface shall be subject to the display of the machine.
注意：本说明书操作界面仅供参考，实际操作界面请以机器实际显示为准。
0.0
0.0
0.0
To avoid extended pre-heating time, you can warm up the machine before selecting the model or setting some parameters.
为了避免打印预热时间较长，可以先对机器进行预热，再选择模型或者设置其他参数，节省预热时间。
>>
0.0
0.0
0.0
200 60 200 60
14