Epson VITROS ECi - Manual (Page 5)

Introduction
Installation and Site Specifications
Part No. 7B6090 Operator’s Guide
Version 2.0 VITROS ECi/ECiQ Immunodiagnostic System
1-7
e-Connectivity™
e-Connectivity™ requires a Virtual Private Network (VPN) and Modem.
The VPN and Modem require two electrical outlets and non-dedicated
power lines can be used. They can also be plugged into a single power strip
which can share the same receptacle as the ECi/ECiQ System. Power cords
are supplied with the VPN and Modem.
Line Voltage and Frequency for VPN and Modem used world wide:
Refer to Chapter 1, “Introduction” for detailed information on the VPN and
Modem.
Refer to Chapter 2, “System Overview” for detailed information on
e-Connectivity.
Printer
Line Voltage and Frequency for printers used in North America:
Electrical Outlet (Receptacle Type)
The electrical outlet (receptacle type) for the system is as follows:
• North America: NEMA 5-20R
• Continental Europe: CEE7 “Shuko”
Electrical Outlet (Receptacle type) for Printers used in North America:
VPN Modem
Line Voltage: 100 - 240 volt AC Line Voltage: 100 - 240 volt AC
Frequency: 47/63 Hz Frequency: 50/60 Hz
Epson LX/Model 300* Epson LQ/Model 570e Texas Instruments Omni 800/Model 830e
Line Voltage: 99-132 volt AC Line Voltage: 99-132 volt AC Line Voltage: 120 volt AC
Frequency: 50/60 Hz Frequency: 50/60 Hz Frequency: 50/60 Hz
*Standard printer for the system. Printers are ordered in accordance with regional specifications.
Epson LX/Model 300* Epson LQ/Model 570e Texas Instruments Omni 800/Model 830e
NEMA 5-15R NEMA 5-15R NEMA 5-15R
*Standard printer for the system. Printers are ordered in accordance with regional specifications.