beautypg.com

Troubleshooting, Sound and audio volume, Bluetooth® device connection – Panasonic RZ-S300W True Wireless In-Ear Headphones (Green) User Manual

Page 24: Phone calls, Bluetooth, 24 troubleshooting, Sound and audio volume bluetooth, Device connection phone calls

background image

Other

24

Troubleshooting

Before requesting service, make the following checks. If you are in doubt about some of the check points, or if
the remedies indicated in the chart do not solve the problem, refer to “Customer Services Directory” if you
reside in the U.S.A., or refer to “CONTACT INFORMATION” if you reside in Canada. (Refer to “Limited
Warranty”.)

No sound.

• Make sure that the earphones and the Bluetooth

®

device are connected correctly. (

l

16)

• Check if music is playing on the Bluetooth

®

device.

• Make sure that the earphones are turned on and the volume is not set too low.
• Pair and connect the Bluetooth

®

device and the earphones again. (

l

16)

• Check if the Bluetooth

®

compatible device supports “A2DP” profile. For details on profiles, see “Listening to music”

(

l

18). Also refer to the operating manual for the Bluetooth

®

compatible device.

Low volume.

• Also raise the volume on the Bluetooth

®

device, not just on the earphones.

Sound from the device is cut off. / Too much noise. / Sound quality is bad.

• Sound may be disrupted if signals are blocked. Do not fully cover the earphones with the palm of your hand, etc.
• The device may be out of the 10 m (33 ft) communication range. Move the device closer to the earphones.
• Remove any obstacle between the earphones and the device.
• Switch off any wireless LAN device when not in use.

The device cannot be connected.

• You can pair a maximum of 10 Bluetooth

®

devices with the earphones. When you pair a device after the maximum

has been exceeded, previous devices are overwritten. To use overwritten devices again, do the pairing again.

• Delete the pairing information for this unit from the Bluetooth

®

device, then pair them again. (

l

16)

The voice of the person on the other end of the call is small.

• Also raise the volume on the Bluetooth

®

device, not just on the earphones.

Cannot make a phone call.

• Check if the Bluetooth

®

compatible device supports “HSP” or “HFP” profile. For details on profiles, see “Listening to

music” (

l

18) and “Making a phone call” (

l

19). Also refer to the operating manual for the Bluetooth

®

enabled

phone.

• Check the audio settings on the Bluetooth

®

compatible telephone, and if the setting does not allow communication

with this unit, change the setting. (

l

16)

Sound and audio volume

Bluetooth

®

device connection

Phone Calls