Panasonic RZ-S300W True Wireless In-Ear Headphones (Green) - Manual (Page 19)

Operation
19
Making a phone call
With Bluetooth
®
enabled phones (cell phones or smartphones) that support the “HSP” or “HFP” Bluetooth
®
profile, you can use the unit for phone calls.
• HSP (Headset Profile):
This profile can be used to receive monaural sounds and establish two-way communication using the
microphone on the unit.
• HFP (Hands-Free Profile):
In addition to the HSP functions, this profile has the incoming and outgoing calls function.
(This unit does not have a function that allows you to make phone calls independently of a Bluetooth
®
enabled
phone.)
1 Connect the Bluetooth
®
device and the unit. ( l 16, “Connecting a Bluetooth
®
device”)
2 Touch a touch sensor (L or R) on the earphone once to answer an incoming call.
• During an incoming call, ringtone will sound from the unit and the earphone LEDs will blink.
• (HFP only) To reject a phone call, touch and hold a touch sensor (L or R) for about 2 seconds.
3 Start talking.
• The earphone LEDs will repeatedly blink 2 times during a call.
• The volume can be adjusted during a phone call.
For operating procedures ( l 22, “Operating with the touch sensors”)
4 Touch and hold an earphone touch sensor (L or R) for about 2 seconds to end the call.
Note
• There may be instances when hands free setting needs to be done on the Bluetooth
®
enabled phone.
• Depending on the Bluetooth
®
enabled phone, you may hear incoming and outgoing call ringtones of the phone from
the unit.
• You can have the Bluetooth
®
enabled phone make phone calls by using the microphone of the unit and an app of the
Bluetooth
®
enabled phone. ( l 21, “Activating voice functions”)