Westcott FJ200 Strobe - Manual (Page 5)

Components ( ​ Included ​ )
● FJ200 Strobe
● FJ200 Lithium Polymer Battery
● FJ200 Battery Charger & Cord
● FJ200 30° Honeycomb Grid & Clip
● FJ200 Gel Pack (Red, Green, Blue, Yellow, Orange, & Diffusion)
● FJ200 Reflector (FJ200 Mount, 5")
● FJ200 Tilter Bracket
● FJ200 Flash Tube
● FJ200 Flash Tube Cover
● FJ200 Travel Case
Important things to know before starting…
Reviewing Firmware Files
Firmware updates will be made available on the ​ ​ FJ200 product page ​ ​ ( ​ https://www.fjwestcott.com/4740 ​ )
to improve the performance of the FJ Wireless System. Please review ALL documentation that’s included
with each firmware download to ensure all of the necessary steps for preparation are complete before
installing the firmware.
TTL ±3 Flash Exposure Compensation
±3 TTL Flash Exposure Compensation (FEC) on the FJ-X2m Wireless Trigger or FJ80 Universal
Speedlight is independent of the Flash Exposure Compensation (FEC) on the FJ200 Strobe. Meaning, a
change of the FEC ±3 on the FJ-X2m or FJ80 will adjust the light output in TTL mode, however, the
FJ200 screen
​ will not ​ indicate the FEC changes made on the FJ-X2m or FJ80. The FJ200 FEC can be
further adjusted ±3 on the light directly.
Canon Continuous Mode
When photographing in Canon Continuous Mode, two overlapping-squares will be visible on the FJ-X2m
& FJ200 displays and the FJ Wireless System will default to Manual Mode; disabling TTL and HSS
functionality. Exit Continuous Mode on the Canon camera to resume TTL and HSS functionality.
Flashes Per Charge
The FJ200 was designed to achieve 450+ full-power flashes with every battery charge. Achieving this
requires that the screen intensity be set to MIN in the
​ Settings Menu ​ .
4