Epson C82069* User Manual

Page 34

8. Change the Paper Source, Paper Size, Orientation, or other items

if necessary.

9. Click “Connections” in the “Setup” menu.

10. Select the port for your printer. If you select a port already being

used by another printer, change the other printer’s port setting

to none.

11. Click “OK.”

12. Close the Control Panel. The setting process is now complete.

Note: You

cannot load paper from your printer’s optional paper

tray when using Windows 2.x.

Running the screen-font installation program

Select the Windows version you plan to use with your typeface by

following the steps below.

1. Insert the EPSON PostScript™ CARD Fonts (MS-DOS™ Format)

Disk 1 in Drive A:. If you are still in Windows, exit to DOS.

2. Type “A:” at the DOS prompt and press the ENTER key.
3. Type “INSTALL” and press the ENTER key again. Follow the

instructions on the install program’s screen. See steps 6 through

10 on pages 3-6 through 3-8.

3-10

Installing Screen Fonts and Drivers