Epson C82069* - Manual (Page 14)

For EPL-4000/4100 and ActionLaser users
1.
2.
Hold down the SelecType button for several seconds until the
display shows SelecType LEVEL2.
Press the or button until the “MODE ASSIGN” menu
appears.
3.
4.
Press the button to enter the option; the CH submenu (for
example, CHP LQ >) appears.
Press the or button to choose the interface that will use
the PostScript CARD. (If your desired interface is displayed in
step 3, ignore this step).
5. Press the button to enter the printer mode option. You see
the icon, which means the displayed printer mode is currently
selected.
6. Press the or button until the PS” option appears.
7. Press the button to set the PostScript mode.
8. Press the SelecType button three times to exit SelecType.
The PostScript mode remains in effect until you change the setting
or turn off the printer. If you wish to make this setting permanent,
use the “P-CONFIG. SAVE” menu in SelecType Level 2. See your
printer manual.
1-4 Handing the PostScript CARD