HP Z40c G3 39.7" 21:9 Curved 5K IPS Monitor - Manual (Page 39)

Table A-3 Preset timing resolutions (continued)
Preset Timing name Pixel format Horz freq (kHz) Vert freq (Hz) USB Type-C/
DisplayPort
HDMI
2 480p 720 × 480 31.469 59.940 ✓ ✓
3 576i 720 × 576 15.625 50.000 ✓
4 576p 720 × 576 31.250 50.000 ✓ ✓
5 720p50 1280 × 720 37.500 50.000 ✓ ✓
6 720p60 1280 × 720 45.000 60.000 ✓ ✓
7 1080i50 1920 × 1080 28.125 50.000 ✓
8 1080i60 1920 × 1080 33.750 60.000 ✓
9 1080p50 1920 × 1080 56.250 50.000 ✓ ✓
10 1080p60 1920 × 1080 67.500 60.000 ✓ ✓
Energy saver feature
This monitor supports a reduced power state.
The reduced power state is initiated if the monitor detects the absence of either the horizontal sync signal
or the vertical sync signal. Upon detecting the absence of these signals, the monitor screen is blank, the
backlight is turned off, and the power light turns amber. In the reduced power state, the monitor uses < 0.5 W
of power. There is a brief warm-up period before the monitor returns to its normal operating state.
See the computer manual for instructions on setting the energy saver mode (sometimes called “power
management feature”).
NOTE: This power saver feature works only when the monitor is connected to a computer that has energy-
saver features.
By selecting the settings in the monitor Sleep Timer utility, you can also program the monitor to initiate the
reduced power state at a predetermined time. When the monitor Sleep Timer utility initiates the reduced
power state, the power light blinks amber.
34 Appendix A Technical specifications