Asus Republic of Gamers Swift PG48UQ 47.5" 4K HDR 138 Hz Gaming Monitor - Manual (Page 26)

3-7 Chapter 3: General Instruction
• AudioWizard : Select the sound mode.
• USB Hub : Sets the USB Hub availability during standby.
• Power Indicator : Turn the power LED indicator on/off.
• Power Key Lock : Disable/Enable the Power key.
• Key Lock : Enable this function to disable all function keys.
Press the Navigation button down for more than five seconds to
cancel the key lock function.
• Power Setting : Select the power setting mode.
If the setting is set to Standard Mode , it may result in higher
power consumption. On the other hand, if the setting is set
to Power Saving Mode , it may cause limited luminance
performance.
Power Setting
Standard mode setting may result in higher power consumption.
Power saving mode may cause limited luminance performance.
Would you like to switch to Standard mode?
NO
YES
• OSD Setup : Configure the OSD menu related settings.
• OSD Position : Set the OSD menu position.
• OSD Timeout : Adjust the OSD timeout.
• Transparency : Adjust the OSD background from opaque to
transparent.
• Zoom By Remote Control : Select the OSD menu size
when using the remote control.
• Zoom by Hot Key : Select the OSD menu size when using
the Control buttons.
• DDC/CI : Enable/Disable the DDC/CI function.
• Screen Protection : Configure the screen saver related set
up. You can improve the image quality issues related to image
retention when the screen is on for a certain amount of time.
• Screen Saver : Enable/disable the screen saver function.
The screen brightness will automatically decrease when
there is no change on the screen.
• Pixel Cleaning : It calibrates any issues that may arise on
the screen when your monitor has been turned on for a long
time. The process will take approximately 6 minutes. This
function will automatically activate when the monitor is turn
off. Do not unplug the power cord while it is in progress.
If you power on the monitor, the Pixel Cleaning will stop
operating.