Installation – Acer Predator X35 BMIPHZX 21:9 180 Hz Curved NVIDIA G-SYNC VA Gaming Monitor User Manual

Page 19

EN-10

INSTALLATION

To install the monitor to your host system, please follow the steps as given
below:
Steps
1. 1-1 Connect HDMI Cable (Only HDMI-input model)

a. Make sure both the monitor and computer are powered-OFF.
b. Connect the HDMI cable to the computer.

1-2 Connect DP Cable (Default input) (Only DP-input model)

a. Make sure both the monitor and computer are powered-OFF.
b. Connect the DP cable to the computer.

2. Connect the adapter

a. Connect the AC cord to the adapter.
b. Connect one end of the adapter to the monitor and the other end to
a properly grounded, AC outlet.

3. Power-ON Monitor and Computer

Power-ON the monitor first, then power-ON the computer.
This sequence is very important.

4. Select Power-off USB charge ON/OFF to enable/disable Power-off USB

charge function.

5. If the monitor still does not function properly, please refer to the

troubleshooting section to diagnose the problem.

HDMI