Epson 31-396 - Manual (Page 6)

6
1. Open door (A) Fig. 1, on front of machine, by sliding
latch lock (B) back, and pulling out on door.
Fig. 1
A
B
2. Remove the two screws (C) Fig. 2, and remove the
sanding fence (D).
Fig. 2
C
D
Fig. 3
3. Lift up on hook (H) Fig. 3, and remove the shelfs (J)
and (K).
H J K
Fig. 4
4. Remove the four screws that attach the sander base
to the shipping skid. Note: Two of the screws are shown
at (L) Fig. 4.
L
5. T H E M A C H I N E I S E X T R E M E LY
HEAVY. HAVE FOUR OR MORE PEOPLE LIFT THE
MACHINE OFF THE SHIPPING SKID.