Registering a digital certificate on the projector – Epson LightScene EV-115 2200-Lumen WXGA Laser 3LCD Projector (Black) User Manual

Page 69

Open the Epson Web Control from your Web browser.

Select

Developer's Menu

Set the

Enable API

setting to

Enter one of the following Web APIs to operate the projector:

URL

Supported methods

Description

http:///api/v01/contentmgr/remote/power/on GET/POST/PUT

Turns the projector on
(WebAPI may not
respond immediately)

http:///api/v01/contentmgr/remote/power/off

0 to 63 (default is 128)

http:///api/v01/contentmgr/playlist/play/:id

0 to 7 (default is 0)

http:///api/v01/contentmgr/playlist/stop

0 to 31 (default is 128)

Note:

In the above URLs, enter the IP address for the projector in the field. For example, a URL

instructing a projector with the IP address 192.168.0.2 to playback playlist ID 3 would look like this:
http://192.168.0.2/api/v01/contentmgr/playlist/play/3

If secure HTTP is enabled, change the http in the URL to https.

Parent topic:

Using the Projector on a Network

Registering a Digital Certificate on the Projector

Follow the instructions here if you need to install a digital certificate on the projector to provide security
for your presentation files.

Note:

You can register a digital certificate over a network. However, be sure to register just once or the

certificate may not install correctly.

Importing a Web Server Certificate Using the Projector Menus
Registering Digital Certificates from a Web Browser
Digital Certificate Types

Parent topic:

Using the Projector on a Network