Epson LightScene EV-115 2200-Lumen WXGA Laser 3LCD Projector (Black) - Manual (Page 149)

149
Setting Options Description
Standby Mode Standby Mode
Port
Selects the following when the projector is in
standby mode (turned off):
Standby Mode : Communication On indicates
that the projector can be monitored and
controlled over a network when the projector is
in standby mode; enable this setting to monitor
and control the projector over a network when
the projector is in standby mode
When monitoring or controlling the projector
using wireless LAN, set
Connection Mode to
Advanced
Port : selects the Wired LAN or Wireless LAN
port to use while the Standby Mode setting is
set to Communication On
DC Out (2.0A)/GPI In
Settings DC Out/GPI In Select which operation to execute depending on
the input signal from the device, such as when
an external sensor is connected to the
DC Out
(2.0A)/GPI In port.
DC Out/GPI In : enables or disables GPI-1
Settings and GPI-2 Settings . Set to Always
On/On to enable the GPI settings. Also, set to
Always On/On to keep the external sensor
device operating and continue supplying power
to the streaming media player when the projector
is not projecting images. This lets the device
start earlier, or perform updates automatically
over a network if necessary. Set to
Off to
continue using the USB port for power.