Epson Home Cinema 2200 2700-Lumen Full HD 3LCD Smart Projector (2021 Version) - Manual (Page 99)

99
Power light Status light Lamp light Temp light Status and solution
Flashing blue Varies Off Flashing
orange Projector is too hot
• Make sure that the vents and air
filter are not clogged with dust or
obstructed by nearby objects
• Clean or replace the air filter
• Make sure the environmental
temperature is not too hot
Flashing blue Varies Flashing
orange Off Replace the lamp soon to avoid
damage; do not continue using the
projector
Off Flashing blue Flashing
orange Off Internal projector error; turn the
projector off, unplug it, and contact
Epson for help
Off Flashing blue Off Flashing
orange A fan or sensor has a problem; turn
the projector off, unplug it, and
contact Epson for help
Off Flashing blue Flashing
orange Flashing
orange Auto Iris error; turn the projector off,
unplug it, and contact Epson for
help
Off Flashing blue Orange Orange Power error; turn the projector off,
unplug it, and contact Epson for
help
Off Flashing blue Orange Off Lamp or lamp cover has a problem
• Check to see if the lamp is burned
out, broken, or installed
incorrectly; reseat or replace the
lamp as necessary
• Check that the lamp cover is
installed correctly
• If the problem persists, unplug the
projector and contact Epson for
help