Solutions when "no signal" message appears – Epson EpiqVision Mini EF12 1000-Lumen Full HD Laser 3LCD Smart Projector with Wi-Fi User Manual

Page 84

• If you are projecting from a computer using an HDMI cable, turn off the computer and the projector.

Make sure the HDMI cable is securely connected, turn the projector on, then turn the computer on.

• Make sure the computer's display resolution does not exceed the projector's resolution and frequency

limits. If necessary, select a different display resolution for your computer. (See your computer manual
for details.)

• If you are trying to view online content, make sure you have an active Internet connection.

• If the other solutions do not solve the problem, reset all of the projector settings using the options on

the

Reset

menu.

Parent topic:

Solving Image or Sound Problems

Related references

Projector Light Status
Projector Parts - Remote Control

Solutions When "No Signal" Message Appears

If the "No Signal" message appears, try the following solutions:

• Press the

Source Search button on the remote control and then select from the displayed

sources. Wait a few seconds for an image to appear.

• Turn on the connected computer or video source, and press its play button to begin your presentation,

if necessary.

• Check the connection from the projector to your video sources.

• If you are projecting from a laptop computer, make sure it is set up to display on an external monitor.

• If necessary, turn the projector and the connected computer or video source off and then on again.

• If you are projecting from an HDMI source, replace the HDMI cable with a shorter one.

• Connect the video source directly to the projector.

• If the other solutions do not solve the problem, reset all of the projector settings using the option on the

Settings

menu.