Scanning, Starting a scan, Starting a scan from a scanner button – Epson WorkForce DS-6500 Document Scanner User Manual

Page 21

Scanning

You can scan your originals and save them as digital files.

Starting a Scan

After placing your originals on your product for scanning, start scanning using one of these methods.

Parent topic:

Scanning

Starting a Scan from a Scanner Button

You can scan using the

start button on your scanner. This automatically starts Document Capture Pro

(Windows) or Document Capture (Mac) and the scan job you have assigned to the button.

Note:

Make sure Epson Scan 2 and either Document Capture Pro (Windows) or Document Capture

(Mac) are installed on the computer connected to the scanner.

Make sure the scanner is connected to your computer or network.

Load an original in your scanner.

Press the

start button.

The scanner starts the job that was assigned to the

start button in Document Capture Pro

(Windows) or Document Capture (Mac).

Note:

You can view or change the scan settings using Document Capture Pro (Windows) or

Document Capture (Mac).