Binding margins on a scanned booklet are blurry – Epson DS-1630 Flatbed Color Document Scanner User Manual
Page 95
95
Parent topic:
Solving Scanned Image Quality Problems
Related references
Additional Scanning Settings - Advanced Settings Tab
Characters are not Recognized During Conversion to Editable Text (OCR)
If characters in your scanned images are not recognized during OCR conversion, try these solutions:
• Make sure your original is loaded straight on your product.
• Use an original with clear text.
• Adjust these Epson Scan 2 settings (if available) and try scanning again:
• Select the correct
Image Type
setting.
• Select or adjust the
Text Enhancement
setting.
• If the
Image Type
is set to
Black & White
, adjust the
Threshold
setting.
• Select the correct
Text Language
setting.
• Set the
Image Type
to
Grayscale
.
• Set the scanning resolution between 200 and 600 dpi.
• If the original document is in landscape mode, set the
Rotate
setting to
Auto
in Epson Scan 2.
• If you are using OCR software, check the manual for any additional adjustments.
Parent topic:
Solving Scanned Image Quality Problems
Related references
Additional Scanning Settings - Advanced Settings Tab
Related tasks
Related topics
Placing Originals on the Scanner
Binding Margins on a Scanned Booklet are Blurry
When scanning a booklet on the scanner glass, characters may appear distorted or blurred on the
binding margin. If this occurs, the characters may not be recognized correctly when you save the
scanned image as a searchable PDF.
To decrease distortion or blurring, gently press down on the document cover to flatten the booklet while
scanning.