Connecting the network interface unit, Setting up network scanning – Epson DS-1630 Flatbed Color Document Scanner User Manual

Page 26

Connecting the Network Interface Unit

See the documentation that came with the optional Epson Network Interface Unit for instructions on
connecting it to your scanner.

Parent topic:

Using the Network Interface Unit

Setting Up Network Scanning

You can set up network scanning through the optional Epson Network Interface Unit. First connect the
unit to your scanner and verify that both are working properly. Then follow the instructions here to set up
computers for network scanning using the Epson Scan 2 Utility.

Note:

Make a note of the IP address or host name of the Epson Network Interface Unit so you can enter

it in these steps.

Do one of the following to start the Epson Scan 2 Utility:

•

Windows 10

: Click

and select

EPSON

Epson Scan 2 Utility

•

Windows 8.x

: Navigate to the

Apps

screen and select

Epson Scan 2 Utility

•

Windows (other versions)

: Click

Start

, and select

All Programs

Programs

. Select

EPSON

Epson Scan 2

Epson Scan 2 Utility

•

Mac

: Open the

Applications

folder, open the

Epson Software

folder, and select

Epson Scan 2

Utility

Select

Settings

from the Scanner drop-down list.