Epson DC-30 Wireless Document Camera - Manual (Page 61)

No. Symbol mark
Approved
standards
Explanation
Q ISO 3864 Contact prohibition
To indicate injury that could occur due
to touching a specific part of the
equipment.
R --- Never look into the optical lens while the
projector is on.
S ---
Do not
place anything on
top of the
projector.
T ISO3864
IEC60825-1 Caution, laser radiation
To indicate the equipment has a laser
radiation part.
U ISO 3864 Disassembly prohibition
To indicate a risk of injury, such as
electric shock, if the equipment is
disassembled.
V IEC60417
No.5266 Stand-by or preparatory state for a part
of equipment
To indicate the stand-by or preparatory
state for a part of equipment.
W ISO3864
IEC60417
No.5057 Caution, moving parts
To indicate the instructional safeguard to
keep away from moving parts.
X IEC60417
No.6056 Caution, moving fan blades
To indicate the instructional safeguard to
keep away from moving fan blades.
Y IEC60417
No.6043 Caution, sharp edges
To indicate that the marked item
contains sharp edges and should not be
touched without taking care.
Z --- Never look into the optical lens while the
projector is on.
No. Symbol mark
Approved
standards
Explanation
a ISO7010
No.W027
ISO 3864 Warning; Optical radiation
To warn of optical radiation. Taking care
to avoid injury to eyes and skin when in
the vicinity of optical radiation.
b IEC60417
No.5109 Not to be used in residential areas
To identify electrical equipment which is
not suitable for a residential area (e.g.
equipment which produces radio
interference when in operation).
c --- Indicates that you should not look into
the lens while the LED is on.
Safety Standard Compliance Symbols and Descriptions
61