Epson DC-30 Wireless Document Camera - Manual (Page 30)

Switching the Projected Image
When a computer is connected to the document camera, you can switch
the image projected from the projector using the [
] button on the
document camera or the remote control.
Freezing an Image
To freeze the image, press the [ ] button on the document camera or
remote control.
After freezing the image, you can remove your document while leaving
its image displayed on the screen. Place your next document under the
camera lens and press the [
] button again; your presentation continues
without interruption.
Projecting Small Objects
To project a small object, lower the camera arm. You can place the
camera head within approximately 5 cm (2 inches) of the object.
To zoom in on part of the image, press the [ ] button on the
document camera or remote control. Press the [ ] button to zoom out.
Projecting
30