Sony PXW-Z150 4K XDCAM Camcorder - Manual (Page 20)

20
Power-saving setting
(POWER SAVE)
To conserve power, this setting allows you to change the
transmitter to sleep mode using the wireless remote control
function.
When the transmitter changes to sleep mode, transmission
of the RF audio signal and metadata is stopped. For this
reason, “NO DATA” appears for all items in the TX1/2
menu, except for “SLEEP” in the POWER SAVE
indication.
Setting the audio input level
(INPUT
LEVEL)
You can set the input level to the transmitter.
Transmission power setting
(RF POWER)
You can change the transmission power of the transmitter.
Always perform pairing after changing the maximum RF
output power setting for a transmitter. If you fail to do so,
configuration of RF output power settings via the wireless
remote control function may become impossible.
For details on pairing, see “Pairing with a transmitter” on
page 18.
+48V power setting
(+48V)
Turns the +48V on the transmitter on or off.
This function may not be supported depending on the
transmitter.
Battery level display setting
(BATT
REMAIN)
This sets the display method for the transmitter battery
level.
Note
Note
Note