Sony PXW-Z150 4K XDCAM Camcorder - Manual (Page 15)

15
RX (tuner) 1/2 Menu
For details on menu operation, see “Basic menu
operations” on page 12.
Use this menu to set the digital wireless receiver functions
(the main functions of this receiver).
The following shows the US model display.
* The antenna currently selected by the diversity function is indicated by “a”
or “b”.
Group/channel selection
(GP/CH)
See “Carrier Frequencies and Channel Steps” on page 27
for factory settings.
For details, see“Selecting the frequency band / group /
channel” on page 7.
Frequency band selection
(BAND)
See “Carrier Frequencies and Channel Steps” on page 27
for factory settings.
For details on the groups and channels included in each
frequency band, refer to the frequency lists.
Direct frequency input function
(FREQ
INPUT)
This function enables you to set the frequency directly by
selecting preconfigured values.
For details on configuration, see “Setting the frequency
directly” on page 8.
Active channel scanning function
(ACT CH SCAN)
The active channel scan function operates.
For details, see “Using the active channel scan function”
on page 9.
Clear channel scan function
(CLR CH SCAN)
The clear channel scan function operates.
For details, see “Using the clear channel scan function”
on page 9.
Transmitter search function
(SEARCH
TX)
This function enables quick searching for transmitters
communicating with the receiver via Cross Remote.
When a transmitter is found, the transmitter display
responds by flashing.
• If the transmitter is not compatible with the transmitter
search function, the transmitter will not respond.
• This function cannot be used if Cross Remote
communication is not available, regardless of the audio
reception status.
Searching for a transmitter
Hold down the SET button in the SEARCH TX screen,
then press the SET button again when the
“SEARCH?YES” display flashes.
You can also begin a transmitter search by pressing the +
and – button simultaneously.
You can search for the selected transmitter by pressing the
SET button after the display flashes when pressing the +/–
buttons.
SEARCH TX1?: Search for a transmitter communicating
via RX1 and Cross Remote
SEARCH TX2?: Search for a transmitter communicating
via RX2 and Cross Remote
However, if the power is on for one tuner, the above
selection screen is not displayed.
Using the RF squelch function
(RF SQUELCH)
This function disables the audio when the RF signal
becomes weak and the sound quality deteriorates. This
prevents interference from a nearby Sony digital wireless
transmitter set at the same frequency.
20 dBµ: Sets the squelch level to 20 dBµ.
OFF: The RF squelch function does not operate.
Encrypted transmission function
(ENCRYPTION)
Set the parameters for the encrypted transmission function.
SECURE KEY: Sets the secure key compatible with the
first generation and second generation DWX series.
AES256: Sets the AES256 secure key.
PASSWORD: Sets the password method.
OFF: The encrypted transmission function is not used.
Menu name Function name
Item to be set
*
Notes