Technical specifications – Sony E 35mm f/1.8 OSS Lens User Manual
Page 5
Technical Specifications
Picture Performance
•
Panel
a-Si TFT Active Matrix LCD
•
Picture Size (Diagonal)
438.2 mm (17
⅜
inches)
•
Effective Picture Size (H x V)
381.9 x 214.8 mm
15 1/8 x 8 1/2 inches
•
Resolution (H x V)
1920 x 1080 pixels (Full HD)
•
Aspect
16:9
•
Pixel Efficiency
99.99%
•
Colors
Approx. 16.7 million colours
•
Viewing Angle (Panel Specification)
80°/60°/80°/80° (typical) (up/down/left/right contrast > 10:1)
•
Normal Scan
0% scan
Input
•
Composite Input
BNC (x1), 1 Vp-p ±3dB, sync negative
•
SDI Input
BNC (x2)
•
HDMI Input
HDMI (x1) (HDCP correspondence)
•
Audio Input
Stereo mini jack (x1), -5 dBu 47 k
Ω
or higher
•
Parallel Remote
RJ-45 Modular connector 8-pin (x1) (Pin-assignable)
•
DC Input
XLR-type 4-pin (male) (x1), DC 12 V to 17 V (output impedance 0.05
Ω
or less)
Output
•
Composite Output
BNC (x1), Loop-through, with 75
Ω
automatic terminal function
•
SDI Output
BNC (x1)*, output signal amplitude: 800 mVp-p ±10%, output impedance: 75
Ω
unbalanced
*Output from SDI 1 only.
•
Audio Monitor Output
Stereo mini jack (x1)
•
Speaker (Built-in)
2.0 W+2.0W (Stereo)
•
Headphone Output
Stereo mini jack (x1)
General
•
Power Requirements
100 V to 240 V AC, 0.4 A to 0.3 A, 50/60 Hz
DC 12 V to 17 V, 2.7 A to 1.9 A
•
Power Consumption
Approx. 38 W (max.)
Approx. 28 W (average power consumption in the default status)
•
Inrush Current
(1) Maximum possible inrush current at initial switch-on (Voltage changes caused by manual switching): 60 A peak, 0.3 A r.m.s. (240V AC)
(2) Inrush current after a mains interruption of five seconds (Voltage changes caused at zero-crossing): 48 A peak, 0.2 A r.m.s. (240V AC)
•
Operating Temperature
0°C to 35°C (Recommended: 20°C to 30°C)
32°F to 95°F (Recommended: 68°F to 86°F)
•
Operating Humidity
30% to 85% (no condensation)
•
Storage/Transport Temperature
-20°C to +60°C
-4°F to +140°F
•
Storage/Transport Humidity
0% to 90%
LMD-B170
5