Sony VENICE 2 Digital Motion Picture Camera (8K) User Manual

Page 17

DSC-RX10M4
4-725-744-11(1)

C:\Users\gotanda\Desktop\4725744111DSCRX10M4UC2\01GB-DSCRX10M4UC2\020PRE.indd
DTP data saved: 2017/07/19 10:29
PDF file created: 2017/07/28 13:21

Step 2: Charging the battery pack while it is inserted in
the camera

Turn the power off.

Connect the camera
with the battery pack
inserted to the AC Adaptor
(supplied) using the micro
USB cable (supplied), and
connect the AC Adaptor
to the wall outlet (wall
socket).

Charge lamp on the camera (orange)
Lit: Charging
Off: Charging finished
Flashing: Charging error or charging paused temporarily because the
camera is not within the proper temperature range

• Charging time (full charge): approximately 150 min (when charging a

fully depleted battery pack at a temperature of 25°C (77°F))

• When you use a completely new battery pack or a battery pack that

has not been used for a long time, the charge lamp may flash quickly
when the battery is charged. If this happens, remove the battery pack
or disconnect the USB cable from the camera and then re-insert it to
recharge.

• Be sure to use only genuine Sony brand battery packs, micro USB

cables (supplied) and AC Adaptors (supplied).