Sony a7C II Mirrorless Camera (Silver) - Manual (Page 22)

22
Listening to Audio from
a Bluetooth Device
To listen to an audio source from a
Bluetooth device (e.g. headphone) via
this player, you need to pair the
Bluetooth device with this player.
Pairing is an operation where the
Bluetooth devices are registered to each
other before connection. Set [Bluetooth
Mode] in [Bluetooth Settings] to [On]
(page 29) before pairing a Bluetooth
device with this player.
1
Place the Bluetooth device within
1 meter from the player.
2
Perform any of the following
steps:
– When connecting to a device for
the first time, press BLUETOOTH
button on the remote.
– Select [Bluetooth Device] option
on the playback screen.
– Select [Device List] in [Bluetooth
Settings].
3
Set the Bluetooth device in
pairing mode.
For details on setting the Bluetooth
device in pairing mode, refer to the
instruction manual supplied with the
device.
4
Press M / m repeatedly to select
the device you want, and press
ENTER.
When the Bluetooth connection is
established, the device name will
appear on the TV screen.
5
Start playback content.
6
Adjust the volume.
Adjust the volume of the Bluetooth
device first. If the volume level is
still low, adjust the volume level by
pressing OPTIONS on the remote
during playback screen and select
[Bluetooth Volume]. Then, press
M / m to adjust the volume.
b
Some Bluetooth device does not support
volume control.
To disconnect the Bluetooth device
Perform any of the following steps:
– Press BLUETOOTH button on the
remote (page 13).
– Disable the Bluetooth function on the
Bluetooth device.
– Turn off the player or the Bluetooth
device.
b
Before you turn off your Bluetooth device,
turn down the volume level of your TV to
avoid sudden high volume outbursts.
Pairing with a Bluetooth
device