Sony All-in-One PXW-Z280 Camera Transport Kit with Accessories - Manual (Page 11)

11
Connecting to Video Equipment or a Computer
When making connections, be sure to do the following:
• Turn off all equipment before making any connections.
• Use the proper cables for each connection.
• Insert the cable plugs properly; poor connection at the plugs may cause a malfunction or poor picture quality. When
pulling out a cable, be sure to pull it out from the plug, not the cable itself.
• Refer to the operating instructions of the connected equipment.
When connecting two DisplayPort cables to project a “4096 × 2160” or “3840 × 2160” high resolution picture, connect
DisplayPort output 1 and DisplayPort output 2 of the workstation to DisplayPort input 1 and DisplayPort input 2 of the
unit respectively.
If no picture is projected with the workstation connected to the unit with DisplayPort cables, check the settings of the workstation, or graphic
boards.
Connecting to a workstation (V Split display connection)
Note
Right side of the unit
DisplayPort output
DisplayPort cables (not supplied)
: Video signal flow
Workstation