Roland JUPITER-Xm Portable Synthesizer - Manual (Page 27)

27
IMPORTANT NOTES
Power Supply
• Place the AC adaptor so that the side with text
is downward.
Use of Batteries
• If operating this unit on batteries, please use
Ni-MH batteries.
Placement
• Do not allow objects to remain on top of the
keyboard. This can be the cause of malfunction,
such as keys ceasing to produce sound.
• Depending on the material and temperature
of the surface on which you place the unit, its
rubber feet may discolor or mar the surface.
Maintenance
• To clean the unit, use a dry, soft cloth; or one
that is slightly dampened. Rubbing too hard in
the same area can damage the finish.
Repairs and Data
• Before sending the unit away for repairs, be
sure to make a backup of the data stored
within it; or you may prefer to write down the
needed information. Although we will do our
utmost to preserve the data stored in your
unit when we carry out repairs, in some cases,
such as when the memory section is physically
damaged, restoration of the stored content
may be impossible. Roland assumes no liability
concerning the restoration of any stored
content that has been lost.
Additional Precautions
• Any data stored within the unit can be lost
as the result of equipment failure, incorrect
operation, etc. To protect yourself against the
irretrievable loss of data, try to make a habit
of creating regular backups of the data you’ve
stored in the unit.
• Roland assumes no liability concerning the
restoration of any stored content that has been
lost.
• Never strike or apply strong pressure to the
display.
• Use only the specified expression pedal. By
connecting any other expression pedals, you
risk causing malfunction and/or damage to the
unit.
• Do not use connection cables that contain a
built-in resistor.
• If this unit is used in an environment that
is subject to electromagnetic radiation, the
display might become dimmer, but this is not a
malfunction.
Using External Memories
• Please observe the following precautions when
handling external memory devices. Also, make
sure to carefully observe all the precautions that
were supplied with the external memory device.
• Do not remove the device while reading/
writing is in progress.
• To prevent damage from static electricity,
discharge all static electricity from your
person before handling the device.
Caution Regarding Radio Frequency
Emissions
• The following actions may subject you to
penalty of law.
• Disassembling or modifying this device.
• Removing the certification label affixed to the
back of this device.
• Using this device in a country other than
where it was purchased
Intellectual Property Right
• It is forbidden by law to make an audio
recording, video recording, copy or revision of
a third party’s copyrighted work (musical work,
video work, broadcast, live performance, or
other work), whether in whole or in part, and
distribute, sell, lease, perform or broadcast it
without the permission of the copyright owner.
• Do not use this product for purposes that could
infringe on a copyright held by a third party.
We assume no responsibility whatsoever with
regard to any infringements of third-party
copyrights arising through your use of this
product.
• The copyright of content in this product
(the sound waveform data, style data,
accompaniment patterns, phrase data, audio
loops and image data) is reserved by Roland
Corporation.
• The copyright of content in this product
(the sound waveform data, style data,
accompaniment patterns, phrase data, audio
loops and image data) is reserved by Roland
Corporation.
• Purchasers of this product are NOT permitted
to extract said content in original or modified
form, for the purpose of distributing recorded
medium of said content or making them
available on a computer network.
• This product contains eParts integrated
software platform of eSOL Co.,Ltd. eParts is a
trademark of eSOL Co., Ltd. in Japan.
• The Bluetooth® word mark and logos are
registered trademarks owned by Bluetooth
SIG, Inc. and any use of such marks by Roland is
under license.
• This Product uses the Source Code of μT-Kernel
under T-License 2.0 granted by the T-Engine
Forum (www.tron.org).
• Roland is an either registered trademark or
trademark of Roland Corporation in the United
States and/or other countries.
• Company names and product names appearing
in this document are registered trademarks or
trademarks of their respective owners.
• In this manual, company names and product
names of the respective owners are used
because it is the most practical way of
describing the sounds that are emulated using
DSP technology.
USING THE UNIT SAFELY
WARNING
Concerning the Auto Off function
The power to this unit will be turned
off automatically after a predetermined
amount of time has passed since it
was last used for playing music, or its
buttons or controls were operated (Auto
Off function). If you do not want the power to be
turned off automatically, disengage the Auto Off
function (p. 22).
WARNING
Use only the supplied AC adaptor and
the correct voltage
Be sure to use only the AC adaptor
supplied with the unit. Also, make
sure the line voltage at the installation
matches the input voltage specified
on the AC adaptor’s body. Other
AC adaptors may use a different polarity, or be
designed for a different voltage, so their use could
result in damage, malfunction, or electric shock.
WARNING
Use only the supplied power cord
Use only the attached power cord. Also,
the supplied power cord must not be
used with any other device.
Handle the ground terminal carefully
If you remove the screw from the
ground terminal, be sure to replace
it; don’t leave it lying around where it
could accidentally be swallowed by
small children. When refastening the
screw, make that it is firmly fastened, so it won’t
come loose.